bathroom shower door brass mirror polished 180 degree commercial adjustable hinges for glass doors-copy
- AttentionGlass must be toughened
- ApplicationShower room,office,hotel,house,etc.
- Size80x50mm or OEM&ODM service for your choice
- Quality Control100% inspected by QC before shipping
- MOQ100 PCS
Installation and attention of glass door hinge
Means of preparation
Special installation tools shall be prepared before installation, such as measuring tape/level ruler, carpentry pencil for line drawing and positioning, carpentry hole opener/pistol drill for hole opening, screwdriver for fixing, etc.
Line drawing positioning
First, use the installation measuring board or carpentry pencil to mark and position (the drilling edge is generally 5mm), and then use a pistol drill or carpentry hole opener to drill a 35mm hinge cup mounting hole on the door panel, with a drilling depth of 12mm.
Fixed hinge cup
Insert the hinge into the hinge cup hole on the door plate and fix the hinge cup with self-tapping screws.
After the hinge is inserted into the cup hole of the door panel, open the hinge, insert and align the side plate, and fix the base with self-tapping screws.
Open the cabinet door to test the effect. The general hinges can be adjusted in six directions, with the upper and lower aligned. The two doors are moderate on the left and right. The best effect is to debug the cabinet door. The clearance after the door is installed and closed is generally 2mm.
Installation position and quantity
Theoretically, the larger the distance between two hinges, the stronger the bearing capacity. Of course, this also needs to consider the actual situation. Three hinges can be used for heavy household doors, and two hinges can be used for general doors.
Prevent falling fan
Falling leaf means that the upper gap is gradually increased and the lower gap is gradually reduced due to the poor installation of doors and windows, resulting in poor opening and closing, and even falling off in serious cases. Generally, the reason for this situation may be that too small specifications of hinges are selected, or matching screws are not used.
Note the gap distance
The gap between the hinge and the door panel must be well controlled, otherwise, the appearance will be very ugly. The gap of the door panel is normally 3-5mm, and expansion joints should be reserved.
Whether the hinge groove matches the height, width, and thickness of the hinge. Whether the hinge is matched with its connecting screws and fasteners. The hinge connection method shall match the material of the frame and leaf. For example, the hinge used for the steel frame wooden door is welded on the side connected with the steel frame and fixed with wood screws on the side connected with the wooden door leaf.
The fan shaft shall be in the same vertical line
During installation, ensure that the axes of the hinges on the same leaf are on the same vertical line to prevent the door and window leaf from springing up. The process of hinge installation is not complicated, but the so-called details determine the success or failure. In fact, there is a lot of knowledge in the small hinge. Improper purchase and installation will affect the comfort of the home. Therefore, decoration users must pay special attention to the texture of the product and reasonable installation.